Under Shelf SCOB LED Strip | Blue 280 LEDs/m 10mm 24V IP20

Blue under shelf lighting is for atmosphere, not task light. Fitted to the shelf underside, this SCOB strip lays one fixed blue wash over bottles, vinyl, consoles or models. Its 280 LEDs per metre sit beneath a continuous phosphor coating, so the line reads as dot-free colour, not pinpoints.

Cut to order from 1 to 10 metres, it measures 10mm wide, draws 9W per metre and runs on 24V DC. IP20 rated: dry indoor shelving only, never a bathroom zone or outdoors.

Where does blue shelf lighting actually work?

Blue belongs on display shelving, not working shelving. It suits home bar shelves behind glassware, gaming and media units, alcove shelving holding a collection, and floating shelves treated as a feature. Choose white strip for bookshelves and anywhere someone reads or checks detail.

Blue renders almost nothing accurately. Printed text and labels flatten under it, so it underperforms above a reading shelf and excels above glass, chrome and gloss, where 9W per metre catches every edge.

Does this blue strip need a controller?

No. It is a single fixed colour, so there is no channel to mix and no controller to buy. You need one constant-voltage 24V driver sized roughly 20% above total load: a 5 metre run at 9W per metre pulls 45W, so a 60W driver suits.

RGB and RGBW strip needs a controller to blend its channels; this one has none, which removes a box, a remote and a failure point. To vary the level, fit a 24V dimmer between driver and strip, not a mains wall dimmer. Never run the strip coiled on the reel, and never lay it on bare metal without insulation. Match it to a 24V constant-voltage driver.

How do I size and cut it to my shelf?

Measure the shelf underside and take 20mm off each end so the strip stays hidden from standing height. Cut points sit every 25mm. A 1 metre shelf leaves 960mm of usable run, and the nearest cut line below that is 950mm, or 38 segments, leaving 10mm. Allow separately for end connections and installation clearance.

1. Cut cold: disconnect the driver, then cut only on the marked line.
2. Mount in channel: the 10mm width fits standard aluminium profiles, which spread heat and hide the strip edge.
3. Set it back: keep the profile 15–20mm behind the shelf front so you see blue on the objects, not the strip.

It works on shop display shelving and decorative kitchen shelving too.

Need a length worked out? Call Telford on 01952 370008, email sales@ukledlights.co.uk, or browse the under shelf LED strip range — free UK delivery, 2026 stock in Shropshire.

Delivery
We use DPD, Royal Mail and DX. Available services, costs and delivery estimates are shown at checkout for your address. Mainland UK rigid profiles exactly 2m are £19.85 per order by DX; rigid profiles longer than 2m are £34.65 per order by DX, including mixed baskets and orders over £90. To Northern Ireland and the Republic of Ireland, rigid profiles 2m or longer are £39.85 per order. Established bendable-profile and flexible-cover exceptions remain on their applicable services. Made-to-measure products may require additional preparation time.

Returns
Eligible unused standard products can be returned in line with our published policy. Products cut or prepared to your measurements cannot be cancelled or returned once preparation has started unless they are faulty.

Read our shipping policy and returns policy before ordering a custom-cut item.