Under Cabinet COB LED Strip | White 10mm 24V IP20 8.33mm Cut

Under Cabinet COB LED Strip helps you fit a continuous light line to kitchen wall units with fine 8.33mm cut spacing. Use it above a dry worktop or along a pantry preparation area, with the colour and length selected to suit your cabinet layout.

Why choose the fine-cut version?

Closely spaced 8.33mm (0.833cm) cut points give more finishing positions than 50mm-cut tape. Measure each cabinet section and allow for connections. The strip is 10mm wide; check the usable internal width of your aluminium profile rather than its outside dimensions.

Which colour suits my kitchen?

Select 2700K or 3000K for warm white, 4000K for natural white, 5000K for daylight white or 6500K for cool white. These are fixed colour-temperature variants, not tunable-white lighting. Match adjoining sections to the same option for a consistent appearance.

How is the strip powered and installed?

Fit beneath a wall unit in a suitable aluminium profile. This IP20 version is for dry interiors only, away from splashes, steam and condensation. It uses 9W/m: 5m draws 45W. Allowing 25% extra capacity gives 56.25W, so select a compatible 24V constant-voltage driver of at least 60W, following its loading guidance. The driver is not included; do not connect directly to mains.

Can you cut it to my measurements?

Choose from 1–15m lengths and enter your required finished length when using made-to-measure. For example, 2.3m selects the 3m price tier, while your cut request stays on the order. Choose the extension cable length separately. Cuts must follow the marked interval, and no continuous section may exceed 15m.

Dimensions for cabinet fitting

Kitchen scenes are illustrative. Profiles, drivers and dimming controls are supplied separately.

For a kitchen with several cabinet sections, send your measurements for bespoke lighting support. ATOM LED is UK-based; made-to-measure cuts follow the 8.33mm marks and 15m limit.

Delivery
Available services, costs and delivery estimates are shown at checkout for your address. Made-to-measure products may require additional preparation time.

Returns
Eligible unused standard products can be returned in line with our published policy. Products cut or prepared to your measurements cannot be cancelled or returned once preparation has started unless they are faulty.

Read our shipping policy and returns policy before ordering a custom-cut item.