Skydance WT5 5-in-1 Wi-Fi LED Strip Controller, 12–24V

Build one controller into several types of constant-voltage LED tape system with the Skydance WT5. Its selectable modes cover single-colour dimming, CCT, RGB, RGBW and RGB+CCT, while Tuya Smart provides app control on a 2.4GHz Wi-Fi network.

Two wireless control routes

WT5 can be operated through Tuya Wi-Fi or paired with a compatible Skydance 2.4GHz RF remote. A remote is not included. Set the required output mode before wiring and use only the terminal arrangement shown for that LED type; this listing is WT5, not V5-L(WT).

Key specifications

• 12–24V DC constant-voltage PWM controller
• DIM, CCT, RGB, RGBW and RGB+CCT modes
• Five outputs at 3A each; 15A maximum total
• Tuya Smart over 2.4GHz Wi-Fi
• Compatible Skydance 2.4GHz RF remote support
• Reverse-polarity, overheat and short-circuit protection
• Dimensions: 114 × 38 × 20mm

Power and installation

The box contains the WT5 controller only; LED tape, power supply and remote are separate. Choose a DC supply matching the LED voltage and total load, isolate it before wiring, verify polarity and observe all channel limits. Never connect the controller or low-voltage LEDs directly to 220–240V AC mains. Complete setup in line with the manufacturer instructions.

Download the WT5 setup and wiring manual (PDF).

Delivery
Available services, costs and delivery estimates are shown at checkout for your address. Made-to-measure products may require additional preparation time.

Returns
Eligible unused standard products can be returned in line with our published policy. Products cut or prepared to your measurements cannot be cancelled or returned once preparation has started unless they are faulty.

Read our shipping policy and returns policy before ordering a custom-cut item.