Shelf & Shadow-Gap Mini LED Neon Flex 4.5×4.5mm 24V IP65

Introduce a fine line of light into shelf edges, display joinery and narrow shadow gaps with this 4.5×4.5mm Mini Neon Flex. Its square cross-section takes up little space, while the top-bend format is designed for curves that rise or fall through the installation plane.

Choose 2700K, 3000K, 4000K or 6000K white to match the room and finish. The 24V product uses 240 LEDs/m at 11W/m, with a stated 690 lm/m output and CRI above 90. A suitable 24V driver is required, and each continuous run must stay within 5 metres.

Measure the detail first

The strip cuts at 25mm (2.5cm) marks. Check the actual groove, the vertical bending route and cable access before machining or closing the joinery. IP65 applies to the silicone body, not an unfinished end or connector, and the light is not intended for submersion.

UK LED Lights provides made-to-measure lighting from the UK, cut only at the 25mm marks and within the 5m continuous-run limit. Share your shelf or shadow-gap plan.

Delivery
Available services, costs and delivery estimates are shown at checkout for your address. Made-to-measure products may require additional preparation time.

Returns
Eligible unused standard products can be returned in line with our published policy. Products cut or prepared to your measurements cannot be cancelled or returned once preparation has started unless they are faulty.

Read our shipping policy and returns policy before ordering a custom-cut item.