RGB LED Neon Flex 220V 240V 8x16mm IP65 Dimmable with Remote Kit

Create a continuous line of RGB colour with this 8mm-wide, 16mm-deep LED neon flex kit. Choose your length and adjust colours, effects and brightness with the supplied controller and remote.

What is included?

Your selected neon flex length, RGB controller with remote, supplied mains plug and mounting clips at one clip per metre.

Choose the right length

Available in 30 length options from 1 to 50 metres. The side-bending flex follows horizontal curves and has cut points every metre. It operates on 220–240V AC and uses 14W per metre. Use the supplied plug and controller—not a low-voltage LED strip driver—and do not hardwire the kit.

Where can it be installed?

The IP65 flex suits indoor decorative lighting and limited, sheltered outdoor installations. The controller is not waterproof and must remain dry in a suitable protected enclosure outdoors. Seal the front connection and end cap using the specified silicone and heat-shrink method.

Not suitable for bathrooms, saunas, pools, submerged installations, ground recesses or exposed weather. Disconnect the supply before handling connections or cutting, and cut only at marked one-metre intervals. Maximum continuous run: 50 metres. Supplied with a one-year warranty, subject to correct installation and use.

Delivery
Available services, costs and delivery estimates are shown at checkout for your address. Made-to-measure products may require additional preparation time.

Returns
Eligible unused standard products can be returned in line with our published policy. Products cut or prepared to your measurements cannot be cancelled or returned once preparation has started unless they are faulty.

Read our shipping policy and returns policy before ordering a custom-cut item.