RGB IR Controller 12V 24V For RGB Strip Light & RGB Neon Flex

• The volts of the power supply must correspond to the volts of controller. This RGB infrared remote controller is widely used in 5050 2835 3528 led lights remote replacement
  
  
• Led light strip remote can be adjust R/G/B color freely. 6 DIY modes / 20 static colors / 6 color changing modes / brightness dimmer. RGB led controller is equipped with memory function
  
  
• Turn on led lights, press DIY1 button, it will enter DIY mode. ② You can press arrows of Red Green and Blue to adjust the color that you want. ③ Finishing the color adjustment, press DIY1 to save the current color. Same way to set DIY2 to DIY6
  
  
• Pull out the plastic cover on the buttom of remote before use. ② Connect 4 pin output port with led strip (arrows marks between control box and strip connector should be on same position). ③ Remote should be aimed at the ir receiver and without any obstacles
  
  
• Turn off the light strip. ② Press the "FADE7" button, the light strip will flash once. ② Press the three keys R.G.B to adjust the color order. ③ Turn on light strip, the buttons control the right color. ④ If not, repeat the above steps until remote button control the correct color

Delivery
Available services, costs and delivery estimates are shown at checkout for your address. Made-to-measure products may require additional preparation time.

Returns
Eligible unused standard products can be returned in line with our published policy. Products cut or prepared to your measurements cannot be cancelled or returned once preparation has started unless they are faulty.

Read our shipping policy and returns policy before ordering a custom-cut item.