Kitchen Plinth & Kickboard LED Neon Flex 10×6mm 24V IP65

Add an even low-level glow beneath kitchen units with this 10×6mm Mini Neon Flex. Its broad emitting face suits plinths and kickboards, while the top-bend construction can follow rises and falls in the planned route. It also works for bed bases, stair risers and wider joinery details where the 10mm face can be recessed or clipped securely.

Choose the finish

Select warm 3000K, balanced 4000K or cool 6000K white. The 24V strip uses 280 LEDs per metre, is rated at 9W/m and has a stated output of 890 lm/m with CRI above 90. Size the driver for the total connected load and keep each continuous run within 10 metres.

Cutting marks occur every 25mm (2.5cm), giving useful control at corners and returns. The IP65 silicone body helps resist dust and water jets, but it is not for submersion; ends and cable connections still need sealing appropriate to the installation.

UK LED Lights prepares made-to-measure lighting in the UK. Cuts must follow the 25mm marks and 10m run limit. Send us your plinth measurements.

Delivery
Available services, costs and delivery estimates are shown at checkout for your address. Made-to-measure products may require additional preparation time.

Returns
Eligible unused standard products can be returned in line with our published policy. Products cut or prepared to your measurements cannot be cancelled or returned once preparation has started unless they are faulty.

Read our shipping policy and returns policy before ordering a custom-cut item.