LTECH M1 + M4-5A LED Dimmer & Remote, 12–24V 20A

Add handheld dimming to compatible single-colour LED tape with the LTECH M1 and M4-5A kit. The remote includes two scene memories and a delayed-off function, while the receiver provides four constant-voltage dimming outputs for a total connected load of up to 20A.

Suitable lighting

This set is for one-colour 12V or 24V DC LED lighting, not CCT, RGB or RGBW tape. It communicates on 433.92MHz RF and has no Wi-Fi or app connection. Use a constant-voltage driver matched to the LED voltage and sized for the actual load.

Key specifications

• M1 dimming remote and M4-5A receiver
• Four outputs rated at 5A each; 20A total maximum
• Touch-wheel brightness control
• Two stored scenes and delayed off
• Receiver dimensions: 175 × 44 × 30mm
• Short-circuit and overload protection
• Remote supply: 3V CR2032 coin cell

Wiring caution

The kit excludes the LED power supply and lighting. Turn power off before making connections, maintain polarity and do not exceed either the per-channel or total rating. These low-voltage products cannot be wired directly to 220–240V AC mains. Keep the coin cell and its compartment secure around children.

View the manufacturer pairing, wiring and operating manual (PDF).

Delivery
Available services, costs and delivery estimates are shown at checkout for your address. Made-to-measure products may require additional preparation time.

Returns
Eligible unused standard products can be returned in line with our published policy. Products cut or prepared to your measurements cannot be cancelled or returned once preparation has started unless they are faulty.

Read our shipping policy and returns policy before ordering a custom-cut item.