Digital Pixel SPI 2811 COB Strip Natural White 4000K 24V IP20

The 10-metre 24V DC COB Digital SPI LED Strip with 360 LEDs per metre and a 10mm width is a high-performance, visually dynamic lighting solution. This Digital SPI strip offers precise control over brightness and colour for individual or grouped LEDs, enabling sophisticated lighting animations far beyond what conventional COB strips can achieve.

Cut and made to measure: We cut and prepare this COB LED strip to suit your specific requirements. Finished lengths must follow the strip’s stated cut-point interval, so a requested length may be adjusted to the nearest valid cut point. The stated maximum continuous run still applies; longer installations must be planned as separate runs with suitable power feeds.

This LED strip supports dynamic lighting effects such as water-flowing animations and chasing sequences, which give the impression of motion along the strip. These effects are ideal for adding energy and interactivity to your lighting design, whether for ambience or visual storytelling. To utilize these effects, a compatible digital SPI controller is required.

This LED strip uses highly efficient COB technology, consuming only 11W per metre. This means that the light is evenly distributed and we achieve a higher lm/W output for the same power than with traditional SMD LEDs. The width of the strip is 10mm, so it can be installed in almost any corner of your home. 

It is worth noting that this strip has a very high colour rendering index (CRI) of 90, so colours are displayed true to life. Daylight has a CRI of 100, so a high CRI is highly recommended in lighting for clothing shops, photo studios or designers, for example.

Complete with a peace of mind 5 year warranty for indoor use.

Power Supply Needed: 24V

Specification:

• Working Voltage: DC 24V
• Light Colour: Natural White 4000K
• LEDs: Digital Pixel SPI COB
• Cutting: 8.3cm
• Continuous run: 10 Metre
• Strip Backing: Adhesive
• Waterproof Rating: IP20 non-waterproof
• Working Temperature: -30°C to 40°C
• LED Neon Flex Dimension: 10cm wide
• Power: 11 W/Meter
• Extension Lead: 20cm Extension Lead
• Warranty: 3 years
• CRI: >90
• Width: 10mm
• Lumens: 770 lm/m
• LEDs: 360 per metre
• Watts: 11 W/m

Delivery
Available services, costs and delivery estimates are shown at checkout for your address. Made-to-measure products may require additional preparation time.

Returns
Eligible unused standard products can be returned in line with our published policy. Products cut or prepared to your measurements cannot be cancelled or returned once preparation has started unless they are faulty.

Read our shipping policy and returns policy before ordering a custom-cut item.