Tunable CCT COB LED Strip 48V 10mm 2700K to 6500K IP20

For a lighting layout that needs a longer continuous run, this 48V CCT COB strip supports up to 20m from a single feed. Adjust between 2700K and 6500K using a suitable CCT controller. It is a practical option for ceiling perimeters, long shelves and indoor display lighting.

Getting the fit right

Allow room for a 10mm-wide strip inside your chosen aluminium profile. Cut only on the marked 50mm (5cm) lines and plan each powered run to stay within 20m. Select your required length before ordering and check the route before fixing the strip in place.

What you need to power it

Use a constant-voltage 48V DC supply together with a 48V-compatible tunable-white controller. Size both for the connected strip at 10W/m, following the supply maker’s guidance on spare capacity. Choose a controller with dimming if you also want brightness adjustment.

With CRI above 90, the light helps retain the appearance of colours in furniture and finishes. The strip has a 7-year warranty and an IP20 rating for dry indoor installations. Keep it clear of water and switch off the supply before working on it.

For an installation with specific measurements, ask about made-to-measure lengths. Cutting follows the strip’s marked intervals and maximum run length.

Delivery
Available services, costs and delivery estimates are shown at checkout for your address. Made-to-measure products may require additional preparation time.

Returns
Eligible unused standard products can be returned in line with our published policy. Products cut or prepared to your measurements cannot be cancelled or returned once preparation has started unless they are faulty.

Read our shipping policy and returns policy before ordering a custom-cut item.