18×16mm Flat 48V LED Neon Flex 6000K IP68 – 50m Roll

Specify a cool-white 6000K line for larger architectural, garden-feature or display routes with this 48V LED Neon Flex. It has a flat emitting face and an 18mm-wide × 16mm-high PVC profile, supplied as one 50 metre roll.

Top-bend routing

The flex curves in the top or vertical plane. Keep the route within that bend direction and never twist, fold or side-bend the body. Cut positions occur every 100mm (10cm), which sets the available increments for any planned section.

Key specifications

• Cool white: 6000K
• 48V DC; 11W per metre
• IP68 PVC body
• Cross-section: 18mm W × 16mm H
• Flat face; top/vertical bend
• Cut interval: 100mm (10cm)
• Supplied roll: 50m
• Maximum continuous powered run: 30m

Feeds and sealing

Treat 50m as the supplied quantity, not a one-end feed allowance. Divide any route beyond 30m into correctly designed powered sections and use a compatible 48V constant-voltage supply. Unroll before energising. The IP68 rating belongs to the flex body; cut ends, connectors, cable entries and joins need compatible sealing. No immersion depth or duration is documented, so submersible use is not claimed. This is fixed cool white rather than RGB.

For made-to-measure sections, contact our UK-based team through Custom Projects. Every length must follow the 10cm cut spacing and 30m run limit.

Delivery
Available services, costs and delivery estimates are shown at checkout for your address. Made-to-measure products may require additional preparation time.

Returns
Eligible unused standard products can be returned in line with our published policy. Products cut or prepared to your measurements cannot be cancelled or returned once preparation has started unless they are faulty.

Read our shipping policy and returns policy before ordering a custom-cut item.