Daylight 5000K COB LED Strip 24V 10mm 480LEDs/m IP20 20m Run

The Daylight 5000K COB LED Strip produces a crisp daylight white for dry indoor work and display areas. The 24V, 10mm-wide tape uses 480 COB LEDs per metre, consumes 7.5W/m and delivers 755 lumens per metre. It can be cut every 50mm and used in continuous runs up to 20 metres.

Its high-density COB layout sits beneath a continuous phosphor surface, so the output appears as an even line rather than separated LED points. This is an ATOM LED branded product supplied by UK LED Lights, specified at CRI >90 and covered by an up-to-seven-year warranty.

Where does 5000K daylight work well?

5000K is cooler and visually crisper than 4000K natural white, without reaching the distinctly cool tone of 6500K. It suits garages, workshops, utility rooms, stock rooms, task benches and commercial display areas where detail and contrast take priority over a relaxed atmosphere. For bedrooms or warm living spaces, 2700K or 3000K will usually feel more appropriate.

The IP20 construction is for dry interiors only. Keep it away from weather, splashes, condensation and steam. Compare other colour temperatures and protected models in the UK LED Lights COB strip range.

Which driver is required?

Select a constant-voltage 24V driver. Work from 7.5W per metre and add 25% headroom: 5m creates a 37.5W load, 10m creates 75W and 20m creates 150W. Choose the next suitable capacity from our LED driver collection. Do not connect the strip directly to mains voltage.

How should a long run be installed?

Plan the route and test the strip while it is fully unwound. Cut only on a marked 50mm copper pad. The self-adhesive backing must be applied to a clean, dry surface. A correctly sized aluminium LED profile keeps the 10mm tape aligned and shields it from accidental contact.

Unsure about the required driver or profile? Ask UK LED Lights for technical guidance.

Select the whole-metre size that covers the measured route, then enter an optional made-to-measure finished length. Requests follow the nearest marked 50mm cut point.

Features

• Smooth, dot-free light from 480 COB LEDs per metre
• Up to a 20m run from one correctly specified 24V feed
• 50mm cut points with optional made-to-measure finishing
• High colour quality with CRI >90 and a 120° beam
• 3M self-adhesive backing and a 150mm lead

Specifications

• Product: Daylight 5000K COB LED Strip
• Voltage and power: 24V DC, 7.5W per metre
• Light output: 755 lumens per metre
• Dimensions: 10mm × 2mm
• Cut points and maximum run: 50mm, up to 20 metres
• Protection: IP20 for dry indoor use
• Colour quality: CRI >90
• Certifications: UKCA, CE, RoHS and UL
• Warranty: Up to 7 years

Delivery
Available services, costs and delivery estimates are shown at checkout for your address. Made-to-measure products may require additional preparation time.

Returns
Eligible unused standard products can be returned in line with our published policy. Products cut or prepared to your measurements cannot be cancelled or returned once preparation has started unless they are faulty.

Read our shipping policy and returns policy before ordering a custom-cut item.